Common closing abnormal problems of swing gates
来源： 索葛电子 Release time: 2017-03-07Source : Soge Electronics
As people ’s attention to entrance and exit safety management continues to increase, the traditional “gate” simply cannot meet people ’s needs. The concept of the door has been extended to the area of regional security, assisting security personnel to identify their identity, pass safely, and put the brakes. The brake is a kind of speed-pass door.
When using a quick-pass swing gate, abnormal closing of the gate should be handled as soon as possible.
1. Close the signal. The gate moves from fast to slow, the speed decreases, and finally closes.
2. Turn on the signal. The gate is slow to fast, the speed increases, and finally opens.
If there is a deviation in the speed of the swing gate between opening and closing, it means that there is an abnormality in the system settings or accessories. Although the impact of this anomaly is low, on the one hand, considering the passing experience, on the other hand, it is related to the safety of the personnel. The speed of the closing process is an indicator of the quality of the swing gate.
Therefore, the abnormal closing of the swing gate is also a matter of great concern.
Solution: Once this abnormal phenomenon appears in the swing gate, check the system's setting of the gate closing time. Note that the closing speed should be consistent with the actual use situation. It should not be too fast or too slow, resulting in the swing gate not being used normally. However, the process must be based on relevant signals.
Among them, the gate is closed abnormally or there is an abnormality in the electric control motor. The motor is an internal accessory that directly controls the closing speed of the swing gate, so the internal inspection of the speed-on swing gate must be performed. Or interference with other parts or systems, or problems with the motor itself.